Built-in combination of 2 wine display cases and 1 non-refrigerated module for glassware or spirits - Home - FIT frame - Inclined display

Thanks to this combination of 3 modular FIT version wine cabinets (with a capacity of 224 bottles), and 1 non-refrigerated module will enable you to present your wines, glassware or spirits in an original way as a perfect showcase, while keeping your wines at the perfect temperature for serving or storing.

The non-refrigerated display case for glassware or spirits will allow you to showcase your finest glassware to accompany your wine service or to display your best spirits.

Versatile use : the 2 units has their own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation.
Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Inclined layout : this showcase can hold up to 224 bottles, inclined on aluminium tubes, of which 128 are inclined towards the front, with the label visible, and 96 are inclined towards the back, which are not visible but accessible. The maximum diameter of the bottles is 95mm, which allows for most 75cl. Champagne).
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

Cladding : this model features a customizable FIT frame, allowing modules to be assembled and the design to be tailored to the ambiance of your space, with 18 finishes available. Its sleek design and elegant lines make it a true aesthetic asset.  
Crafted from HPL, it provides a highly precise finish, perfectly suited to contemporary interiors and premium spaces. More discreet than a traditional frame, the FIT frame blends seamlessly with the cellar, enhancing its contents while optimizing space.

Customizable design : in order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options) :
- The wood frame is available in many different finishes and can also be ordered raw, so you can apply your own finish (paint, laminate, vinyl, etc)
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black
Important: the dimensions of the frame, and therefore those of the wine display, may vary depending on the finishes selected.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural daylight white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control.

Built-in installation: this display cabinet is intended to be placed on the floor in a niche. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinet loaded with bottles. The space in front of the feet must remain entirely free to allow the ventilation of the cooling unit.

Noise level : This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).