Built-in wine display cabinets for 2 facings - Wall crossing - Home - Flat frame - Inclined bottles

This built-in wine display cabinet (wall crossing) will allow you to present up to 112 bottles in an original way, while maintaining them at the perfect temperature for serving or storing.

This showcase is versatile, thanks a its regulation that allows you to program the temperature set point for the bottom of the appliance, as well as the activation of the internal ventilation. Depending on the selected setting, it can be used :
- either for serving white wines, rosés and champagnes : between 4 and 10°C,
- or for serving red wines : between 14 and 16°C or between 14° and 20°C,
- or for both service and conservation of all types of wines : the temperature will then increase from 4 to 16°C over the whole height: 4-8°C for the service of Champagnes, 8-12°C for the service of white and rosé wines, 12-14°C for the conservation of wines and 14-16°C for the service of red wines.

This showcase can accommodate up to 112 bottles, inclined on aluminum tubes, of which 64 are inclined towards the front and 48 are inclined towards the back: 100% of the bottles are directly accessible and 100% of the labels are visible. In addition, the maximum diameter of the bottles is 120mm, which allows to welcome most of the 75cl and magnum sizes of all regions (Bordeaux, Burgundy, Champagne). 
In this version, the interior equipment cannot be modified after manufacturing. However, do not hesitate to consult the other versions of equipment available for this model (see In the same range).

Customizable design :In order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options).
- the wooden frame of the front can be painted in the colour of your choice, and it can also be delivered raw, in order to apply your own finish (paint, laminate, vinyl, etc.). 
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black
Important: the dimensions of the frame, and therefore those of the wine display, may vary depending on the finishes selected.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural daylight white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control.

Built-in installation: this display cabinet is intended to be placed on the floor in a niche crossing a wall, in order to enjoy its front and rear double glass doors. It can also be placed on a stand to raise it, as long as the stand can support the weight of the cabinet loaded with bottles. 
Important: the 4cm high space at the floor level must remain entirely free to allow the ventilation of the cooling unit.

Please note that the wall thickness must not exceed 497 mm.

Noise level: This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).