Combination of 2 wine display cabinets - Home - 3 glazed sides - Interchangeable cover - 38cm deep

Thanks to this combination of 2 modular wine cabinets, with a capacity of 120 bottles, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the perfect temperature for serving or storing.

Versatile use : each of these 2 units has its own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation. Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes: between 4 and 10°C,
- or for serving red wines: between 14 and 16°C or between 14° and 20°C
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Maximum visibility : the glass panels on the front, sides and top give maximum visibility of your bottles. In addition, each module is equipped with 2 sliding doors, facilitating access to the bottles and reducing the space required for opening.

Customizable design : In order to perfectly fit in its environment, the finishing of this showcase is fully customizable (see Options).
- this model is equipped with a customisable and interchangeable cladding joining the units together and adapting its design to the atmosphere of your room. The sliding strip insertion system will also allow you to change the colour of your display cabinets if the products are moved or if the decoration of the room changes.
- all metal parts of the unit (door frames, handles, interior body, bottle holders, etc.) are delivered in natural aluminum as standard, but can be stained in matte black

Bottle display: the interior equipment is also customisable to suit your needs. Depending on the model, the bottles can be displayed inclined or lying on metal tubes or Plexiglas shelves, or even standing on glass shelves. Do not hesitate to consult the different versions of equipment available for your models (see In the same range).
Important : in this version, the equipment included corresponds to the main product picture and cannot be modified after manufacture.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural daylight white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control.

Installation : these display cabinets are designed to be installed freestanding to take advantage of the glass sides. However, it is also possible to install them in a niche. To do so, the space around the feet must remain completely free and an opening must be left above (minimum air passage 200cm² per unit).

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 25°C. Above 25°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).

Noise level. Private use : This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.