Wine display cabinet - HOME - FIT frame - Horizontal bottles - 36cm deep

With this FIT version modular built-in wine cabinet, with a capacity of 24bottles, with the magnetic frame on the front panel only, you’ll be able to present your wines in an original way as a perfect showcase, while keeping them at the perfect temperature for serving or storing.

Versatile use : this unit has its own regulation, with the possibility to set the bottom temperature and to activate or not the internal ventilation.
Depending on the setting, each unit can be used :
- either for serving white wines, rosés and champagnes only
- or for serving red wines only
- or in multi-purpose mode for service and conservation of all types of wine : the temperature will then increase from 4 to 16°C over the entire height of the cabinet : 4-8°C for serving Champagne, 8-12°C for serving white and rosé wines, 10-14°C for conserving wines and 14-16°C for serving red wines.

Horizontal display: in this version, the cabinet can hold up to 24 bottles, lying on aluminum tubes, widthwise, which leaves the label of the bottle placed in front visible. A total of 12 bottles are placed in the front, with the label visible, and 12 are in the back, not visible. The maximum diameter of the bottles is 93mm, which allows for most 75cl sizes (Bordeaux, Burgundy, Champagne).
Important: the interior equipment included corresponds to the main product picture and cannot be modified after manufacture. However, other equipment versions exist to suit your needs (inclined bottles, vertical bottles or mixed equipment). Do not hesitate to consult the different models available (see In the same range).

Cladding : this model features a customizable FIT frame, allowing modules to be assembled and the design to be tailored to the ambiance of your space, with 18 finishes available. Its sleek design and elegant lines make it a true aesthetic asset.  
Crafted from HPL, it provides a highly precise finish, perfectly suited to contemporary interiors and premium spaces. More discreet than a traditional frame, the FIT frame blends seamlessly with the cellar, enhancing its contents while optimizing space.

Smartphone connectivity : as an option, the unit can be remotely controlled via a mobile application on your smartphone: temperature setting, consultation of parameters. This connectivity also allows remote support in case of dysfunction. If you choose this option, all the unit settings must be made exclusively from the application.

Lighting : to highlight your bottles, vertical LED lighting is present over the entire height of the display case, also improving the readability of labels. The standard lighting is natural daylight white (4000°K) and is controlled by a switch on the front. As an option, it is possible to select variable lighting in intensity and colour (either multicolour RGB or different shades of white). In this case, the lighting is controlled by a remote control.

Free standing installation : these display cabinets are designed to be installed freestanding to take advantage of the glass sides. However, it is also possible to install them in a niche. To do so, the space around the feet must remain completely free and an opening must be left above (minimum air passage 200cm² per unit). 

Noise level : Private use. This display case has a complete programming dedicated to a domestic use in order to guarantee a very low noise level, and thus place the device in the room you want.

For optimal operation, this model should be installed in a room where the temperature is between 16°C and 30°C and should never be exposed to sunlight. Above 30°C, the lowest temperature settings will be difficult to reach and there is a risk of condensation on the glass panels (depending on ambient humidity and frequency of opening).